|
|
Post by shep on Sept 30, 2009 21:01:46 GMT 1
ah ken jetex carbs ur dellorto copies but do dellorto jets fit in jetex carbs  |
|
|
|
Post by NorryC on Sept 30, 2009 21:04:29 GMT 1
i reckon the jets would be the same but the emulsifier tubes might be different
|
|
|
|
Post by goldeneye on Oct 9, 2009 18:36:12 GMT 1
aye dellorto jets for a standard SH style carb ( i think they are 5mm) fit, as do the pilots and most other stuff. nowt wrong with jetex carbs, cheap, easy to set up...... and if they go wrong, buy another for 25 quid! try and get proper delly jets, they are machined more acuratley than jetex ones. whats it for shep? i might have some .  |
|
|
|
Post by shep on Oct 9, 2009 19:14:11 GMT 1
liams sx 150 goes great but still doesny start when its hot......even efter tryin yur wee trick wi the holes in the air hose
|
|
|
|
Post by stu1 on Oct 9, 2009 19:38:50 GMT 1
got a spare jetex carb here if you want ti try it
it should have a 20 mil carb slide5914-2
atomiser 5899-5
main jet 102
pilot 45
starter 50
|
|
|
|
Post by NorryC on Oct 9, 2009 22:34:50 GMT 1
read that the slide could be worn so when hot no orth a sook mind i know feck all about lammies
|
|
|
|
Post by shep on Oct 11, 2009 19:17:39 GMT 1
liams gaun ti try a different idle jet,if it doesny work i might try that carb stu
|
|
|
|
Post by scottie101 on Oct 12, 2009 12:19:10 GMT 1
i try another also noticed on my 150 gp that it was suplied with wrong slide but jets are all the same.
|
|
|
|
Post by scottie101 on Oct 12, 2009 12:19:43 GMT 1
am sure i have a brand new spare one too
|
|
|
|
Post by leseke1 on Oct 18, 2009 20:32:04 GMT 1
Hey Shep did you get the problem wi the hot starting on the jetex sorted?Got the same problem wi both my lammys fitted wi jetex carbs.Ive resorted to turning the petrol off and letting the carb run dry on mine but if theres a fix for it coud you let me know.cheers.  |
|
|
|
Post by shep on Oct 18, 2009 21:00:18 GMT 1
Hey Shep did you get the problem wi the hot starting on the jetex sorted?Got the same problem wi both my lammys fitted wi jetex carbs.Ive resorted to turning the petrol off and letting the carb run dry on mine but if theres a fix for it coud you let me know.cheers. still no fixed it yit........i need ti muck aboot wi the jetting  |
|
|
|
Post by scottie101 on Oct 18, 2009 23:52:12 GMT 1
as a said i have a jettex you can try if ou want
|
|
|
|
Post by goldeneye on Oct 25, 2009 16:14:46 GMT 1
try turning petrol off and letting tick over for a little while. or put a 25mil phbl , or a mikuni tm24 through the airbox . beedsped are doing the full mikuni kit for a good price at the moment. manifold, airfilter, spare jets, cable the lot. topper little carb.
|
|
