|
Post by granty on May 7, 2011 7:31:37 GMT 1
Troops - Got Conti Whitewalls fitted to the scoot and with the tyre being slightly bigger my "wee bit wobbly" stand is now "officially wobbly". The stand is straight & Scotty helped me fit strengthening plates previous. It must be that the footboard strut is slightly out of alignment. OK solutions now?
1. Could i take one rubber foot off - bore another hole in stand & then refit rubber with the rollpin?
2. Take stand off & extend it?
3. Use a bit of heat & straighten the strut
4. Any other ideas?
Cheers G
|
|
|
Post by shep on May 7, 2011 7:50:33 GMT 1
a wee bit o heat n bend the stand a wee bit but wid mean re-paintin yur stand......this might work, i done this before n it worked
|
|
|
Post by granty on May 7, 2011 8:15:42 GMT 1
a wee bit o heat n bend the stand a wee bit but wid mean re-paintin yur stand......this might work, i done this before n it worked Cheers Shep -- probably going to be the plan -- I could take the stand off - bend it in the middle moving 1 let forward - repaint & back on
|
|
|
Post by paul on May 7, 2011 11:45:51 GMT 1
put some proper tyres on it...
|
|