|
Post by psychedelicropcircle on Jun 29, 2011 16:40:39 GMT 1
|
|
|
Post by NorryC on Jun 29, 2011 18:27:28 GMT 1
was talking to rab las night and saying with piss poor petrol over there quite a few folk ended up holing pistons
|
|
|
Post by Chrisb on Jun 29, 2011 22:25:17 GMT 1
oh .... guess that answers ma other post .... Bad news Scott
|
|
|
Post by paul on Jun 30, 2011 2:20:31 GMT 1
did you not sense it whist riding it??
|
|
|
Post by psychedelicropcircle on Jun 30, 2011 8:53:33 GMT 1
It kept on cutting oot and generally running shite. Think I'll try one o they EGT thingymiboabs
|
|
|
Post by paul on Jun 30, 2011 9:59:51 GMT 1
It kept on cutting oot and generally running shite. Think I'll try one o they EGT thingymiboabs I think you should get it set up properly first... either timing jetting or an air leak.
|
|
|
Post by psychedelicropcircle on Jun 30, 2011 17:35:18 GMT 1
It kept on cutting oot and generally running shite. Think I'll try one o they EGT thingymiboabs I think you should get it set up properly first... either timing jetting or an air leak. Pulled apart at the moment confident it's not an air leak, timing @ 18 btdc might move to 17 btdc main jet 120 from 115 pilot 55 from 50 air mixture moved from 1.5 turns to 2. HTH
|
|
|
Post by NorryC on Jun 30, 2011 22:22:37 GMT 1
runnng it richer would defo help
|
|
|
Post by paul on Jul 1, 2011 0:10:10 GMT 1
Can you give me the whole engine spec and carb spec and i'll have a wee think?
|
|
|
Post by psychedelicropcircle on Jul 11, 2011 18:40:52 GMT 1
That's the "ped" up an running again increased the squish adjusted the timing changed the cowling tinkered wi the jetting and air mixture braw broony bleck oan the plug...although only daein 30-35 whilst running in piston number3 in 9 months
|
|
|
Post by granty on Jul 11, 2011 20:51:24 GMT 1
Good luck mate
|
|
|
Post by paul on Jul 13, 2011 12:42:00 GMT 1
instead of increasing the squish gap that can lead to detonation and pinking the combustion chamber should be reprofiled.
|
|
|
Post by paul on Jul 17, 2011 16:27:02 GMT 1
What squish gap are you now running?
|
|
|
Post by psychedelicropcircle on Jul 17, 2011 18:01:26 GMT 1
From just uder 1mm to 1.2mm within the advised gap
|
|