|
Post by granty on Jun 8, 2016 21:18:31 GMT 1
Just finished putting the new top end rebuild on the red & white one after Whitby. Thanks to Chunterspeed & Boaby for the techy advice, Chrisb for a couple of tools. My 1st (& not last) top end strip & put back together again --- Ninja like.
|
|
|
Post by Chrisb on Jun 9, 2016 11:20:13 GMT 1
Good news pal
1K miles? surely 500 is enough for it
|
|
|
Post by psychedelicropcircle on Jun 9, 2016 23:24:06 GMT 1
Good news pal 1K miles? surely 500 is enough for it Surely he means 1 kilometre
|
|
|
Post by Chrisb on Jun 10, 2016 10:39:44 GMT 1
[/quote] Surely he means 1 kilometre [/quote] hehe .... he wants it to last a wee bit longer than one of yours
|
|
|
Post by granty on Jun 10, 2016 13:26:34 GMT 1
Good news pal 1K miles? surely 500 is enough for it Nige gave me a hand out from AF ages ago & it recommends 1k miles for hard iron Indian barrels -- that's what it's getting, no take me long of the weather picks up
|
|
|
Post by psychedelicropcircle on Jun 21, 2016 20:34:48 GMT 1
Good news pal 1K miles? surely 500 is enough for it Nige gave me a hand out from AF ages ago & it recommends 1k miles for hard iron Indian barrels -- that's what it's getting, no take me long of the weather picks up The S-yin coming the gither could be turning wheels this w-end, the coastal running in route me thinks?
|
|
|
Post by mull on Jul 7, 2016 23:24:28 GMT 1
AF told me 500 miles then tighten head 20ft lbs and change oil.
|
|
|
Post by shep on Jul 10, 2016 8:17:06 GMT 1
june the 8th yi posted this ...so this will now be run in ?obviously
|
|
|
Post by granty on Jul 11, 2016 18:47:37 GMT 1
june the 8th yi posted this ...so this will now be run in ?obviously hahahahaha -- mind I was doing my Judith Chalmers impersonation -- currently in Spain -- braw, its been to the end of the road & back
|
|
|
Post by granty on Jul 17, 2016 16:06:50 GMT 1
Just managed to get a few miles on the S2 the day -- what a difference with a standard rear shocky & the forks stiffened a wee bit. Rides like a dream and nae more jumpin aboot the road with the R1 Shocky on it. Guess what -- with the correct inlet manifold the rubber even managed to stay on (Thanks Chunterspeed.
Struggling to keep it at 1/4 throttle as it just want to bolt with the 30mm carb on it -- the running in is going to be interesting
|
|
|
Post by skin on Jul 17, 2016 22:23:55 GMT 1
U takin this up on fri granty ?
|
|
|
Post by granty on Jul 18, 2016 11:04:26 GMT 1
U takin this up on fri granty ? Naw pal -- I'll be on the white & yellow one, would love to take the S2 but I'm taking it real easy with it the now -- G
|
|
|
Post by skin on Jul 18, 2016 12:21:47 GMT 1
We could run in tgether pal
|
|
|
Post by granty on Jul 18, 2016 17:18:41 GMT 1
We could run in tgether pal Mate -- Ive only 20 miles on the runnin in 30mph tops at 1/4 throttle -- I'd need to leave the night!!
|
|
|
Post by skin on Jul 18, 2016 20:59:24 GMT 1
A done 75 the night
|
|