|
Post by Chrisb on May 14, 2017 17:58:14 GMT 1
Anyone got something for extracting broken off bolts .... the wee bolt that holds the bottom of the front damper has snapped off in the forks on the GP going across the car park at east fortune today
|
|
|
Post by granty on May 14, 2017 18:43:34 GMT 1
no luck buddy -- sorry pal can't help with that one -- G
|
|
|
Post by NorryC on May 14, 2017 20:25:02 GMT 1
If you can get mole grips tight on and twist out or if enough showing of the thread tac weld a nut on it and then unscrew it
|
|
|
Post by Chrisb on May 15, 2017 10:30:22 GMT 1
If you can get mole grips tight on and twist out or if enough showing of the thread tac weld a nut on it and then unscrew it nope, broken off inside the forks :-(
|
|
|
Post by psychedelicropcircle on May 15, 2017 16:44:34 GMT 1
Drill out and re-tap.
|
|
|
Post by Chrisb on May 17, 2017 11:35:38 GMT 1
so arranged to get it done 8am down at Browns ... came out check bike , aye we can do that when do you want it done ...err now... oh we can't do it today... Fuck it'll have to be when I get back off holiday, cept the MOT runs out in between times ... nothings easy is it :-(
|
|
|
Post by NorryC on May 17, 2017 21:42:45 GMT 1
Take both dampers off for the Mot
|
|
|
Post by Nige on May 17, 2017 23:55:03 GMT 1
As the man says, you dinnae need dampers for an MOT
|
|
|
Post by Chrisb on Jun 8, 2017 8:43:40 GMT 1
sorted ... don't know how this happened but the bolt was rusted to fuck inside and must have been loose for a while as it had elongated the hole ... had to get it helicoiled
replaced bolts on both sides to avoid repeat scenario
|
|