|
|
Post by granty on Apr 22, 2018 22:23:30 GMT 1
When fitting a new gear cable through the trunnion there is a wee disc inside the trunnion -, it's meant to stop the cable from fraying, does it go under the gear cable or on top of the cable & in-between the grub screw?
Just checking -- G
|
|
|
|
Post by NorryC on Apr 23, 2018 19:11:14 GMT 1
On the Vespa it’s under so would imagine the Lammy would be the same as if on top would be a mare to feed the inner through
|
|
|
|
Post by Nige on Apr 23, 2018 23:01:04 GMT 1
Goes underneath bud, remember the trunnions are two different sizes, big yin goes to the inside  |
|
|
|
Post by granty on Apr 24, 2018 6:35:46 GMT 1
Goes underneath bud, remember the trunnions are two different sizes, big yin goes to the inside Ah, that's the problem solved, both trunnions are the same size, that's why I'm struggling to get the spanner on the end of it to tighten up. |
|
