pit
Lamby Polo
Posts: 34
|
Post by pit on Nov 1, 2013 21:32:50 GMT 1
Noticed that I had lost a bolt on the rear hub stud of the lammy the other day. After a closer inspection notice the stud is bent and threaded. So I ordered new studs on tinternt and they don't appear to fit do these come in different sizes. The nut goes on okay but fatter part of the stud won't go through the hole in the hub.
|
|
|
Post by psychedelicropcircle on Nov 2, 2013 7:54:13 GMT 1
Noticed that I had lost a bolt on the rear hub stud of the lammy the other day. After a closer inspection notice the stud is bent and threaded. So I ordered new studs on tinternt and they don't appear to fit do these come in different sizes. The nut goes on okay but fatter part of the stud won't go through the hole in the hub. It's a LHT pit think you need a 9mm ground flat socket to get them in. Nige might have one.
|
|
|
Post by granty on Nov 2, 2013 8:30:24 GMT 1
Indeed Pit, I have spares studs as well, good work if you've managed to get the old one out. I had to use heat and a socket with the edges filed down to get the old one out - G
|
|
pit
Lamby Polo
Posts: 34
|
Post by pit on Nov 3, 2013 18:11:27 GMT 1
Ok cheers lads was driving me nuts. Could not understand why it widdnae gawn in
|
|