|
|
Post by granty on May 25, 2017 7:54:11 GMT 1
Boys -- techo help needed please? Gear change is loose as on the S3, to adjust the tension in the cables is it the same method as other cables with the adjusters & if so is there any method to it (what 1 first etc)
|
|
|
|
Post by NorryC on May 25, 2017 18:45:59 GMT 1
I like the grips you get that you can do it 1handed otherwise same method as the clutch but no pulling as hard , I usually slacken 1 side then pull gently and tighten so you can still select 1st gear then do the other as well or if your adjusters are close in just take them out a bit
|
|
|
|
Post by granty on May 25, 2017 21:00:07 GMT 1
Cheers Norry -- good night fettling -- gear cables done and the gash jetex atomiser in the special carb changed for a proper dellorto one and carb cleaned ---- going like a dream -- I wonder why I didn't think of that 3 years ago!!! hahahaha -- G
|
|
