|
Post by Dean on Aug 13, 2009 15:57:31 GMT 1
the stand seems to be going to far forward also not returning to underside correctly all components seem to be there any ideas fecking murder to get off stand as am jist a wee lad.
|
|
|
Post by NorryC on Aug 13, 2009 21:07:54 GMT 1
is the spring located in the right hole.should be 3 holes in a line , try using the midle 1 as it seems like the spring is located to near to the stand
|
|
|
Post by NorryC on Aug 13, 2009 21:08:31 GMT 1
and use pliers or grips 2 move it or your fingers will geta healthy dunt
|
|
|
Post by graememcd on Aug 13, 2009 23:44:09 GMT 1
Sounds like the stand could be bent. Maybe take it off and compare it to a known good one?
|
|
|
Post by scottie101 on Aug 14, 2009 0:04:37 GMT 1
or fouling exhaust if a new one has been put on might need spring shifted
|
|
|
Post by Dean on Aug 14, 2009 10:46:01 GMT 1
cheers lads its been off to get sprayed by last owner i will check all these out
|
|
|
Post by scottie101 on Aug 14, 2009 15:46:00 GMT 1
dean i will have a look at it on monday night if yu want
|
|